The Trailer Emulator requires the ground and 12 volt battery line to be properly connected in order to check the electric brake circuit. 12 volt light on the emulator will be lit as soon as the emulator is connected to the tow vehicle’s plug. If this does not happen see Troubleshooting Chart. The RT, LT, TL and BU lights will light on the emulator as those functions are activated on the tow vehicle. If this does not happen see
Troubleshooting Chart.
The BK light on the emulator should be off until the brake control is activated. NOTE: The trailer emulator is not an exact trailer load so the light displays on various brake controls will respond differently.
The following can be expected with Tekonsha
Brake Control’s display should show: I .c - With trailer emulator connected and no man- ual slide activation ("c" indicates connection to the trailer). I Varying voltage displayed from 0-13 as manual is activated with the power knob full on.
Download
No comments:
Post a Comment