2010 Lexus RX 350 Remote Engine Start Owner's Guide

The REMOTE ENGINE STARTER allows you to start your engine from outside the vehicle. It utilizes
your vehicle’s keyless entry remote, so there is no need to carry around an extra remote. The
REMOTE ENGINE STARTER is operated the same way for vehicles equipped with or without the
Smart Entry / Push Start system; simply push the remote’s LOCK button in a quick, two-step
sequence. In addition, the REMOTE ENGINE STARTER can activate the heater or air conditioner
according to your preset temperature controls, providing you with a comfortable cabin upon
entry. As an added convenience, the REMOTE ENGINE STARTER can also activate the defroster
(when preset) to clear up the windshield during cold weather.
To ensure your safety, and the safety of anyone near the vehicle, the REMOTE ENGINE STARTER
is designed to shut the engine off when it detects any attempt to enter or move the vehicle
after a remote engine start. Please consult your Lexus dealer for more details.
NOTE: To utilize the REMOTE ENGINE STARTER, your vehicle must have an automatic transmis-
sion; it cannot be used for manual transmission models. The transmission range for remote
start may be shorter than the remote’s basic keyless entry operation. Range can also be af-
fected by the surrounding environment. Laws in some communities require that the vehicle be
within view of anyone using the REMOTE ENGINE STARTER. In some states, use of the REMOTE
ENGINE STARTER may violate state or local laws. Before using the REMOTE ENGINE STARTER,
check your state and local laws.

Source

Solmetric SunEye Quick Start Guide

Install the Solmetric SunEye TM Desktop Companion Software from CD-ROM
- Insert the CD-ROM that came with the Solmetric SunEye TM into the CD drive on your Windows Vista, Windows XP, or Windows 2000 desktop computer.
- If the welcome screen does not automatically open, click Start then My Computer and double-click on the CD drive or directly run setup.exe from the CDROM. Follow the instructions. If not already installed, it will automatically install Microsoft ActiveSync (for Windows XP and Windows 2000) or Window Mobile Device Center (for Windows Vista) which is needed to communicate with the device.
- During the installation, the device connectivity software will try to connect to the Solmetric SunEye TM device. For Windows XP and Windows 2000, and devices that are labeled “SunEye-100N v2”, ActiveSync will automatically start the Synchronization Setup Wizard. Click “Next” to setup synchronization settings. None of the items listed under Information Type should be checked. Click Next to finish.
- You can now launch the Solmetric SunEye TM Desktop Companion from the Solmetric SunEye icon on your desktop or from the start button Start > All Programs > Solmetric SunEye > Solmetric SunEye.

Download pdf Solmetric SunEye Quick Start Guide