BMW key programming device and software are for vehicles equiped with EWS module , coverage 1994-2004 that have EWS module(including EWS2, EWS3 and EWS3+, Rover75, MINI, RangeRover, FreeLander, Discovery).You can programm new keys when all keys are lost or stolen by this device. Of cause be able to add new keys. You will feel it is easy to finish your operation by this friendly software.
Support：
EWS 2,EWS 3,EWS 3+:Include 0D46J, 1D47J, 2D47J, 2D47J(with secured). Safe for reading data from EWS (with secured).
Part One: Install hardware
Connect with DC-12V power supply, turn the Mode switch to M1, the indicator light is on, connect the device and PC by USB line. As below picture:...
Download
Showing posts with label manual bmw. Show all posts
Showing posts with label manual bmw. Show all posts
Wednesday, July 16, 2008
BMW 7 Interface (E65/E66) Installation / Connection Manual
BMW E65/66 Interface Installation Manual
Caution before working
1. Before installation, be sure to key off and wait more than 5 minutes for complete discharge of electricity
2. Don’t turn on the ignition during connectors are disconnected, because if you turn on the ignition with disconnected connectors, ECU falsely recognize status of car as an error and display error code on monitor
3. Be sure to use the tools of proper size and usage.
4. Don’t try to dissemble and assemble by force
5. Use proper tape or soft fabric to protect car from scratch or damage
6. Be sure to use power line from cigar lighter. In the case that you cannot use power line from cigar lighter, be sure to use a relay to protect interface from electric shock
1. Connecting supplied LVDS cable with original monitor
1-1. On upper side of monitor, you can see two star shaped screws with proper screw driver
1-2. There are two connectors, white one and black one. Remove white one first and black one later. (Caution : When you assemble, connect black one first and white one later)
1-3. Be careful not to scratch or damage wood trim
1-4. When you pull out monitor module, slightly lift up dashboard plastic, which make it easier to pull out monitor module
Download
Caution before working
1. Before installation, be sure to key off and wait more than 5 minutes for complete discharge of electricity
2. Don’t turn on the ignition during connectors are disconnected, because if you turn on the ignition with disconnected connectors, ECU falsely recognize status of car as an error and display error code on monitor
3. Be sure to use the tools of proper size and usage.
4. Don’t try to dissemble and assemble by force
5. Use proper tape or soft fabric to protect car from scratch or damage
6. Be sure to use power line from cigar lighter. In the case that you cannot use power line from cigar lighter, be sure to use a relay to protect interface from electric shock
1. Connecting supplied LVDS cable with original monitor
1-1. On upper side of monitor, you can see two star shaped screws with proper screw driver
1-2. There are two connectors, white one and black one. Remove white one first and black one later. (Caution : When you assemble, connect black one first and white one later)
1-3. Be careful not to scratch or damage wood trim
1-4. When you pull out monitor module, slightly lift up dashboard plastic, which make it easier to pull out monitor module
Download
Subscribe to:
Posts (Atom)