To fold the front passenger s seatback flat for extra storage length when transporting long items Slide the seat to the rearmost position Lift up on the recline lever located on the outside edge of the seat and fold the seatback forward as far as it will go 01 01 02 02 To set the clock press and hold the CLOCK button until it beeps The hours will start flashing Press CAT FOLDER or SEEK TRACK to adjust the hours Press the CLOCK button to switch to the minute adjustment Press CAT FOLDER or SEEK TRACK to adjust the minutes SEEK TRACK BUTTON Press the UNLOCk button once to unlock the driver s door only Press the button again within 5 seconds to unlock all doors USING THE PANIC ALARM HILL START ASSIST HSA if so equipped 03 E LOCK SWITCH if so equipped The Electronic Locking Rear Differential E Lock system can help provide added traction if the vehicle is stuck or becoming stuck To activate the E Lock system The 4WD switch must be in the 4LO position 4 wheel drive vehicles The vehicle must be stopped or moving at 4 MPH 7 km h or less and The E Lock system switch must be turned on Once the vehicle is moving or under way the system should be turned off FOLDING THE SECOND ROW BENCH SEAT 05 CAT FOLDER BUTTON CHILD SAFETY REAR DOOR LOCK Child safety locks help prevent the rear doors from being opened accidentally especially when small children are in the vehicle The child safety lock levers are located on the edge of the rear doors When the lever is in the LOCK position the door can be opened only from the outside To manually tune the radio press the CAT FOLDER tune button or or turn the tuning knob to the right or left To move quickly through the channels hold either the or button down for more than 1 5 seconds 06 LOAD BUTTON 01 Shift 07 STATION AND CD SELECT BUTTONS Nissan the Nissan Brand Symbol SHIFT tagline Z and Nissan model names are Nissan trademarks 2006 Nissan North America Inc QR6E 0N50U1 Printing April 2006 04 To store a radio station in a preset you must first select A B or C memory bank by pressing the PRESET A B C button and tuning to the desired AM FM or SAT station.
Download
Showing posts with label nissan xterra. Show all posts
Showing posts with label nissan xterra. Show all posts
Saturday, May 15, 2010
Friday, May 14, 2010
2006 Nissan Xterra Owners Manual
Install the glove box door 6 Fill out the date information on the small replacement label and attach it to the glove box lid 8 18 Maintenance and do it yourself REVIEW COPY 2006 Xterra xtr Owners Manual USA English nna 08 01 05 debbie WINDSHIELD WIPER BLADES CLEANING.
If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running wax or other material may be on the blade or windshield Clean the outside of the windshield with a washer solution or a mild detergent Your windshield is clean if beads do not form when rinsing with clear water Clean each blade by wiping it with a cloth soaked in a washer solution or a mild detergent Then rinse the blades with clear water If your windshield is still not clear after cleaning the blades and using the wiper replace the blades CAUTION After wiper blade replacement return the wiper arm to its original position otherwise it may be damaged when the hood is opened Make sure the wiper blades contact the glass otherwise the arms may be damaged from wind pressure WDI0408 REPLACING Replace the wiper blades if they are worn 1 Lift the wiper arm away from the windshield 2 3 CAUTION Worn windshield wiper blades can damage the windshield and impair driver vision Push the release tab then move the wiper blade down the wiper arm to remove Remove the wiper blade 4 Insert the new wiper blade onto the wiper arm until it clicks into place 5 Rotate wiper blade so the dimple is in the groove Maintenance and do it yourself 8 19 REVIEW COPY 2006 Xterra xtr Owners Manual USA English nna 08 01 05 debbie LDI0443 If you wax the surface of the hood be careful not to let wax get into the washer nozzle 1 This may cause clogging or improper windshield washer operation If wax gets into the nozzle remove it with a needle or small pin 2 8 20 Maintenance and do it yourself REVIEW COPY 2006 Xterra xtr Owners Manual USA English nna 08 01 05 debbie WDI0292 Rear window wiper blade 1 2 3 Lift the wiper arm away from the rear window.
Download
If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running wax or other material may be on the blade or windshield Clean the outside of the windshield with a washer solution or a mild detergent Your windshield is clean if beads do not form when rinsing with clear water Clean each blade by wiping it with a cloth soaked in a washer solution or a mild detergent Then rinse the blades with clear water If your windshield is still not clear after cleaning the blades and using the wiper replace the blades CAUTION After wiper blade replacement return the wiper arm to its original position otherwise it may be damaged when the hood is opened Make sure the wiper blades contact the glass otherwise the arms may be damaged from wind pressure WDI0408 REPLACING Replace the wiper blades if they are worn 1 Lift the wiper arm away from the windshield 2 3 CAUTION Worn windshield wiper blades can damage the windshield and impair driver vision Push the release tab then move the wiper blade down the wiper arm to remove Remove the wiper blade 4 Insert the new wiper blade onto the wiper arm until it clicks into place 5 Rotate wiper blade so the dimple is in the groove Maintenance and do it yourself 8 19 REVIEW COPY 2006 Xterra xtr Owners Manual USA English nna 08 01 05 debbie LDI0443 If you wax the surface of the hood be careful not to let wax get into the washer nozzle 1 This may cause clogging or improper windshield washer operation If wax gets into the nozzle remove it with a needle or small pin 2 8 20 Maintenance and do it yourself REVIEW COPY 2006 Xterra xtr Owners Manual USA English nna 08 01 05 debbie WDI0292 Rear window wiper blade 1 2 3 Lift the wiper arm away from the rear window.
Download
Thursday, May 13, 2010
2004 Nissan Xterra Owners Manual
The jack should be used on firm and level ground 3 To lift the vehicle securely hold the jack lever and rod Carefully raise the vehicle until the tire clears the ground When using alternate rear jack up point for 15 inch wheels raise the vehicle so that the tire is no more than 2 inches 50 mm off the ground 4 Remove the wheel nuts and then remove the tire.
Place the jack directly under the jack up point as illustrated so the top of the jack contacts the vehicle at the jack up point Under some conditions there will not be sufficient clearance to use the primary rear jacking point on vehicles equipped with 15 inch wheels If this occurs use the alternate jack up point 1 for vehicles equipped with 15 inch wheels When using the alternate jack up point position the jack on the axle as close as possible to the tire that needs to be changed Installing the spare tire The spare tire is designed for emergency use See specific instructions under the heading Wheels and tires in the Maintenance and do it yourself section of this manual 1 Clean any mud or dirt from the surface between the wheel and hub 2 Carefully put the spare tire on and tighten the wheel nuts finger tight 3 With the wheel nut wrench tighten wheel nuts alternately and evenly as illustrated until they are tight 6 8 In case of emergency REVIEW COPY 2004 Xterra xtr Owners Manual USA English nna 07 30 04 debbie JUMP STARTING 4 Lower the vehicle slowly until the tire touches the ground Then with the wheel nut wrench tighten the wheel nuts securely in the sequence illustrated Lower the vehicle completely COLD pressure After vehicle has been parked for three hours or more or driven less than 1 mile 1 6 km COLD tire pressures are shown on the Tire and Loading Information label affixed to the driver side center pillar 5 Securely store the flat tire and jacking equipment in the vehicle To start your engine with a booster battery the instructions and precautions below must be followed WARNING If done incorrectly jump starting can lead to a battery explosion resulting in severe injury or death It could also damage your vehicle Explosive hydrogen gas is always present in the vicinity of the battery Keep all sparks and flames away from the battery Do not allow battery fluid to come into contact with eyes skin clothing or painted surfaces Battery fluid is a corrosive sulfuric acid solution which can cause severe burns.
Download
Place the jack directly under the jack up point as illustrated so the top of the jack contacts the vehicle at the jack up point Under some conditions there will not be sufficient clearance to use the primary rear jacking point on vehicles equipped with 15 inch wheels If this occurs use the alternate jack up point 1 for vehicles equipped with 15 inch wheels When using the alternate jack up point position the jack on the axle as close as possible to the tire that needs to be changed Installing the spare tire The spare tire is designed for emergency use See specific instructions under the heading Wheels and tires in the Maintenance and do it yourself section of this manual 1 Clean any mud or dirt from the surface between the wheel and hub 2 Carefully put the spare tire on and tighten the wheel nuts finger tight 3 With the wheel nut wrench tighten wheel nuts alternately and evenly as illustrated until they are tight 6 8 In case of emergency REVIEW COPY 2004 Xterra xtr Owners Manual USA English nna 07 30 04 debbie JUMP STARTING 4 Lower the vehicle slowly until the tire touches the ground Then with the wheel nut wrench tighten the wheel nuts securely in the sequence illustrated Lower the vehicle completely COLD pressure After vehicle has been parked for three hours or more or driven less than 1 mile 1 6 km COLD tire pressures are shown on the Tire and Loading Information label affixed to the driver side center pillar 5 Securely store the flat tire and jacking equipment in the vehicle To start your engine with a booster battery the instructions and precautions below must be followed WARNING If done incorrectly jump starting can lead to a battery explosion resulting in severe injury or death It could also damage your vehicle Explosive hydrogen gas is always present in the vicinity of the battery Keep all sparks and flames away from the battery Do not allow battery fluid to come into contact with eyes skin clothing or painted surfaces Battery fluid is a corrosive sulfuric acid solution which can cause severe burns.
Download
Subscribe to:
Posts (Atom)