On 2001 vehicles without the diagnostic connector in the engine compartment, the use of the SIA reset tool is not possible. The service indicator may be reset using the reset mode in the instrument cluster.
Reset procedure for high and low clusters with SIA III using the Reset Mode:
• Ignition key must be “off”
• Press and hold the trip odometer reset button in the instrument cluster (left button), and turn the ignition key to the first position.
• Keep the button pressed for approximately 5 seconds until one of the following words appear in the display: “OIL SERVICE, or “INSPECTION”, with “RESET”. The service due is shown with “reset” if the coded minimum consumption limit has been reached and resetting is possible. If “reset” is not shown, the minimum limit has not been reached and resetting is not possible.
• Press and hold the reset button again until the word “RESET” begins to flash.
Download
Showing posts with label button. Show all posts
Showing posts with label button. Show all posts
Wednesday, July 16, 2008
Saturday, July 12, 2008
OPERATION GUIDE FOR BECKER 1432
Prepare to enjoy the many pleasures of listening to a superb sound system: the Mercedes-Benz AM and FM stereo radio with cassette player. This Operation Guide is designed to give you both a quick reference of basic functions and features and a detailed description of the system's entire range of operation. To maximize your listening satisfaction, take a few minutes to carefully review all sections of this guide.
BASIC CONTROLS
Power: The sound system will operate with the car's ignition switch in either the PWR on or off position. To operate the radio or the optional CD changer, simply push the power button located at the lower left corner of the radio faceplate. Pushing the power button again will turn the radio off. A tape cassette can be played without using the power button by simply inserting the tape into the cassette port. As soon as the cassette is drawn into position, it will begin to play.
Download
Mode: Pushing this button repeatedly will cause the radio to cycle through each of its
MODE
operating modes: tuner, cassette player and CD player (if so equipped).
BASIC CONTROLS
Power: The sound system will operate with the car's ignition switch in either the PWR on or off position. To operate the radio or the optional CD changer, simply push the power button located at the lower left corner of the radio faceplate. Pushing the power button again will turn the radio off. A tape cassette can be played without using the power button by simply inserting the tape into the cassette port. As soon as the cassette is drawn into position, it will begin to play.
Download
Mode: Pushing this button repeatedly will cause the radio to cycle through each of its
MODE
operating modes: tuner, cassette player and CD player (if so equipped).
Subscribe to:
Posts (Atom)