2001 Toyota RAV4 Media Information

The things we care about. No matter which Toyota you choose, you can be sure of two things. It will deliver the utmost in Quality, Durability and Reliability, the foundation of Toyota’s reputation for excellence. And it will perform with maximum respect for the environment. You see, when we build your Toyota, we strive not only to meet your expectations, but to exceed them. Our objective is to make your driving experience better, easier, safer, more convenient, more fun and more environmentally-friendly than ever before. Our country. Our world.
Every Toyota built in Canada has a recyclable content of at least 85% — and meets or exceeds today’s most stringent emission standards. All of Toyota’s plants are ISO 14001 certified in order to lessen their impact on the environment. But we still constantly look for ways to improve. Most of our current lineup including the Echo, Corolla, Avalon and others, comply with California’s strict low emission standards. And the remarkable new Toyota Prius, rated as an Ultra Low Emission Vehicle (ULEV), combines fuel and electrical power plants to redefine standards in fuel economy and energy efficiency. However, our concern for the environment does not stop with our vehicles. In Canada, for example, Toyota has partnered with Evergreen to launch the Toyota Evergreen Learning Grounds Program. Worldwide, the results of our commitment to the Toyota Earth Charter can be seen in innovations like Toyota’s unique “smog-eating forest”. All in all, it’s more than you might expect from an automobile manufacturer. It’s the least we expect from ourselves.

Source

1993 Toyota Pickup 22RE 3VZ-E Factory Service Manual

This guide cover about Introduction how to use this manual, troubleshooting, precaution, maintenance, Engine Ignition, Starting System, Charging System, Service Specs, Clutch, Manual Transmission, Automatic Transmission, Transfer, Propeller Shaft, Suspension and Axle, Brake System, Steering, Body Electrical, Body Mechanical, Air Conditioning. Maintenance Schedule Maintenance Operations General Maintenance. Engine mechanical description, troubleshooting, tune up procedure, Compression Check, Cylinder Head, Exhaust System, Service Specifications.

MFI system precaution, troubleshooting and diagnosis, Cooling System-Coolant Check and Replacement. Cooling System–Water Pump, Cooling System–Service Specifications. Ignition Description Precautions System Circuit Operation Preparation On Vehicle Inspection Distributor Service Specifications. Body Electrical : General Information Power Source Ignition Switch Lighting System Wiper and Washer System Combination Meter Power Window Control System Power Door Lock Control System Power Mirror Control System Cruise Control System Audio System. Body Mechanical : General Information Hood Front Door Moulding Windshield Back Window Quarter Window (X-Cab) Moon Roof Instrument Panel One-Touch Tail Gate Seat Seat Belt Body Dimensions.

Download

Complete Electrical System and Diagnosis for Toyota

When the engine is not running or is being started, the battery provides power. When the engine is running, the alternator provides power for the vehicle’s loads and for recharging the battery. Analog Vs Digital Meters. Ultimately your diagnosis of vehicle electrical system problems will come down to using a voltmeter, ammeter, or ohmmeter to pinpoint the exact location of the problem. There are two types of each meter analog and digital.

Wire, terminal and connector repair. Conductors, conductors are needed to complete the path for electrical current to flow from the power source to the working devices and back to the power source. Automotive Batteries, General Battery functions, Engine off : battery energy is used to operate the lighting and accessory system. Engine starting : Battery energy is used to operate the starter motor and to provide current for the ignition system during cranking. Engine running : battery energy may be needed when the vehicle’s electrical load requirements exceed the supply from the charging system.

Download

2006 Toyota 4 Runner Wiring Diagram

Part content: ignition coil and igniter, charging system, junction connector, combination meter, engine control, air injection control driver data link connector 3, engine control module. Skid control ECU with actuator suspension, camshaft timing control valve LH, Multiplex Communication System. Engine Immobilisers System.

Transponder Key Computer,Security Indicator Light, Back Door Power Window Control SW, Ignition Key Cylinder Light, Turn Signal and Hazard Warning Light System, Door Lock Control SW Front LH Power Window Master SW. Door Key Lock and Unlock SW Front LH Door Lock Detection SW Front LH Door Lock Motor Front LH, Back Door Power Window Motor, Taillight and Illumination. Electronically Controlled Transmission and A /T Indicator. A BS , TRAC, VSC , Auto LSD, Downhill Assist Control and Hill–Start Assist Control.

Download

2010 Toyota Prius PHEV Conversion Kit User Manual

The Plug-in Hybrid Electric Vehicle Conversion Kit (PHEV) is a rechargeable battery set that is supplementary to a Hybrid vehicle battery. It supplies electricity stored in the supplementary battery, which is charged from an AC wall socket, which provides for 20 to 40 mile of electrically assisted driving per charge, sufficient for most normal daily commutes. It is safe, reliable, saves and is user and environmentally friendly.

Attention
1. Please read instructions before installation.
2. Never connect wires improperly.
3. New batteries should be re-charged to full and balanced before use.
4. Please check the batteries' voltage and balance regularly for the first few times you drive the vehicle.
5. To extend battery life, equipment must be recharged, using the 110VAC household electricity powered charger provided, to full each time and the cells need to be fully balanced after charging.
6. The circuit breaker in the enclosure box is set to be switched off automatically if the current exceeds a pre-set limit
(100A). In the event this breaker switches off you will then need to manually switch it back on before use.
7. Please switch the equipment off immediately if a defect is found while driving.
8. Please do not disassemble the components if the equipment is working normally

What is Included in this Product
◆ 16 / 32 cells for 2KWH / 4KWH, Lithium-Ion batteries
◆ Battery balancers—one for every 8 cells, monitoring and balancing battery voltages to avoid over or under charges to individual cells. This can extend battery life by a factor of 3.
◆ 48V / 15A high power charger
◆ 3000W DC / DC Converter and Controller
◆ Fire extinguisher for protecting when the temperature is over 105℃—First of all, please open the cover and take out the blue insulative inserter to let it work.
◆ Automatic DC circuit breaker—to disconnect high voltage equipment operation in the event of a high current fault.
◆ Easily installed enclosure, simple to use system.

Download

Toyota 2L-T, 3L Engine Repair Manual Supplement

To assist you in finding your way through this manual, the Section Title and major heading are given at the top of every page. An INDEX is provided on the 1st page of each section to guide you to the item to be repaired. At the beginning of each section, PRECAUTIONS are given that pertain to all repair operations contained in that section. Read these precautions before starting any repair task. TROUBLESHOOTING tables are included for each system to help you diagnose the problem and find the cause. The repair for each possible cause is referenced in the remedy column to quickly lead you to the solution.

How to Use This Manual
The procedures are presented in a step-by-step format: #
• The illustration shows what to do and where to do it.
• The task heading tells what todo.
• The detailed text tells how to perform the task and gives other information such as specifications and warnings.

This format provides the experienced technician with a FAST TRACK to the information needed. The upper case task heading can be read at a glance when necessary, and the text below it provides detailed information. Important specifications and warnings always stand out in bold type.

GENERAL REPAIR INSTRUCTIONS
1. Use fender, seat and floor covers to keep the vehicle clean and prevent damage.
2. During disassembly, keep parts in order to facilitate reassembly.
3. Observe the following.
(a) Before performing electrical work, disconnect the negative (—) cable from the battery terminal.
(b) If it is necessary to disconnect the battery for inspection or repair, always disconnect the cable from the negative (—) terminal which is grounded to the vehicle body.
(c) To prevent damage to the battery terminal post, loos- en the terminal nut and raise the cable straight up without twisting or prying it.
(d) Clean the battery terminal posts and cable terminals with a shop rag. Do not scrape them with a file or other abrasive object.
(e) Install the cable terminal to the battery post with the nut loose, and tighten the nut after installation. Do not use a hammer to tap the terminal onto the post. (f) Be sure the cover for the positive (+) terminal is properly in place.
4. Check hose and wiring connectors to make sure that they are secure and correct.
5. Non-reusable parts
(a) Always replace cotter pins, gaskets, O-rings, oil seals, etc. with new ones.
(b) Non-reusable parts are indicated in the component illustrations by the " ♦ " symbol.

Download

Toyota Echo/Yaris TWM Performance Shifter Cable Bushing Kit Installation Manual

It is preferable to park on a flat surface, as you may have to engage and disengage the hand brake and shift from gears to neutral. If you cannot do so and are obliged to install the shifter cable bushings on a slightly inclined surface, place wooden blocks in front or behind the wheels to prevent the car from moving while you’re working.
Estimated Installation Time: 30 minutes
Tools required:
▪ Ratchet
▪ 10 mm deep socket
▪ Ratchet extension
▪ Needle nose pliers/vise grips

Install:
1. Working in the engine bay, unscrew the two battery terminals using a ratchet with a 10mm socket. Remove the battery tie-down using a 10mm deep socket for the two bolts. The throttle cable must be removed from the bracket as shown to the left. Take note of how the battery tie down is installed and put it aside for re-installation later.
2. Remove the battery and plastic battery tray from the engine bay. Put them aside in a safe place for re-installation later.
3. Begin removal of the intake by loosening the bolt highlighted to the left with a 10mm socket and a ratchet and disconnect the outlet tube from the air box. Unplug both sensors highlighted on the picture from the air box. Unclip the two latches on the air box. Remove the top part of the air box and air filter to have access to the bottom part of the air box. Put them aside for re-installation later.
4. Remove the three bolts at the bottom of the air box using a 10mm socket and a ratchet with an extension. Put them aside for re-installation later.
5. Unscrew the bolt holding the intake near the driver side headlight using a 10mm socket and a ratchet with an extension. Remove the bottom part of the intake from the engine bay and put it aside for re-installation later.
6. You now have access to both cable bushings. Remove the cotter hairpins using needle nose pliers. Also remove the metal washers holding down the stock rubber bushings. These washers will not be re-used, but should be kept in case you revert back to the stock bushings in the future.
7. Remove the two stock rubber bushings from the shifter cables. You can use the pin on the transmission arm (where the cotter hairpin was connected) to force the bushings out of the shifter cables. Use the provided sandpaper to clean up both pins and the inside of the loop on the cable if there is corrosion. These bushings will not be re-used but should be kept in case you revert back to stock bushings in the future.

Download

95-97 Toyota Tercel Short Throw Shifter Installation Manual

Installation Procedure:
1. Unscrew the stock shift knob by rotating it counter clockwise.
2. Use a Philips head screwdriver to remove the 2 screws on either side of the console just behind the shift boot. Sliding the seats fully rearward allows easy access to these screws.
3. Slide the front seats fully forward and use a Philips head screwdriver to remove the 2 screws on either side of the back of the center console.
4. Lift the rear portion of the center console out of the car and put in a safe place for re-installation.
5. Locate the clips at the top front portion of the center console. Gently push in the center portion of these clips with your finger or a screwdriver, and then pull out on them to remove them.
6. Pull the plate surrounding the stereo out slightly to free the front portion of the console.
7. Use needle nose pliers to disconnect the clip holding the cigarette lighter power connector to the steel bracket.
8. Disconnect the power connector from the cigarette lighter on the front portion of the console.
9. The front portion of the center console can now be removed from the car. Lift it up from the rear and pull up and out of the car.
10. Use a flat head screwdriver and a hammer to pry the clip on the passenger side of the assembly off of the shaft. Use caution during this step as the clip may break and become a dangerous projectile. Use the screwdriver and wedge it between the plastic assembly and the clip and gradually work it off the shaft. Alternatively, a Dremel tool may be used to cut the clip off as a new one is included in the kit.
11. Remove the clip from the side “L” shaped arm and slide the shift cable off the side arm.

Download

Toyota RAV4 Complete Report Manual

For 2004, the Toyota RAV4 features a more robust engine, exterior and interior updates, and more standard equipment. The previous 148-hp, 2.0-liter four-cylinder has been supplanted by a 2.4-liter that makes 161 hp. The suspension and steering have been retuned accordingly. The front and rear ends both have a new look, and inside, cosmetic changes include a redesigned steering wheel, instrument panel, and center dash. Anti-lock brakes with brake assist are now standard, as are air conditioning, cruise control, steering-wheel audio controls, and power windows, door locks, and mirrors. The RAV4's interior has more room than most mid-size station wagons: 68.3 cubic feet in the rear. The original cute-ute is available with front-wheel drive or a full-time four-wheel-drive system that operates transparently. The RAV4 is nimble, practical, good looking, and well made.

The Avalon, introduced early for '06, is a larger, more powerful, and better-looking version of what had been a pretty anonymous sedan, despite its position at the top of Toyota's line. The Prius hybrid gets redesigned front and rear lamps, new colors, and more luxury options such as a leather interior and a rearview camera. Otherwise, Toyota is concentrating on solidifying its lead in the hybrid race—it plans to double global production of these vehicles to 500,000 next year.
Unchanged: Camry, Camry Solara, Corolla, Corolla Matrix, Echo.
Dead: MR2 Spyder, Celica.
Future: More hybrids, including built-in-North America Prius and Camry, and an Echo replacement. Toyota's truck line adds a Highlander hybrid powered by a 208-hp six-cylinder engine and an electric motor. The 4Runner gets a mild facial, new colors, and a few trim and equipment upgrades, as does the Sienna. The Land Cruiser's 4.7-liter V- 8 is upgraded with variable valve timing, upping power to 275 horsepower, 40 more than previously, and the big truck gets a new grille, headlamps, and taillamps. The RAV4 is scheduled for a major redesign later this year. Unchanged: Highlander, Sequoia, Tacoma, Tundra.
Future: The FJ Cruiser, a boxy two-door SUV with military overtones. A "heavy duty" pickup to compete with the likes of Ford's Super Duty. And a bigger Tundra that will be built in San Antonio in late 2006.

Download