1994-1998 Honda Accord Radio Replacement Installation

Tools Needed To Complete This Install Hand tools needed Accessory tools needed to test and to remove radio wire the new radio PLUS: Wire ties or electrical tape: to neatly bundle and organize your wires for a professional appearance. TOOL TIPS: Small Battery: use a battery to test speaker wires. Touching the (+) positive and (-) negative baterry leads to a pair of speaker will cause the speaker to make a “Pop” sound indicating that pair of wires goes to that speaker. Voltage Meter: Always check +12 Volt power wires for voltage before making wire connections. These wires will fluctuate between 10 and 14 Volts. Solder Iron or Crimp Tool: make wire to wire connections using either a solder iron and electrical tape, OR plastic crimp terminals found at most hardware or auto parts stores.
STEP 1: The center dash console must be loosened and pulled away in order to gain access to screws securing the plastic dash panel surrounding the radio. Open the center console glove box. At the very bottom is a plastic panel that covers hidden screws. With your fingers or a flat head screwdriver, lift up and remove the plastic panel. Once the panel is removed, locate and remove two (2) phillips screws.
STEP 2: Lift open the drink tray door. Pull the drink tray up and pull it out of the center console.
STEP 3: Once the drink tray is removed, locate and Once the three screws have been removed, Hidden under the center console are two (2) remove three (3) phillips screws. the center console can be pull back, away phillips screws that secure the plastic trim from the gear shift console. panel that surrounds the gear shift. Remove (2) screws will be at the bottom of the panel, both screws. and (1) will be at the front left corner near the You only need to pull the center console back top of the opening. 2-3 inches as seen in the photo above.

Source

AUX-IN Mercedes-Benz D2B Fiber Optic Vehicles Installation and Users Guide

Thank you for purchasing our Auxiliary Input Adapter for Mercedes Benz D2B fiber equipped vehicles (AUX-IND2B). This interface is designed to provide a quality sound input to your car’s stereo system. Most frequently our customers use this for iPod or satellite radio. Below is a list of components and tools that you will need. Some you should have received or may have purchased separately.

Please note that your vehicle may vary from what is depicted in this document and ECP, LLC cannot be held responsible for damage as a result of improper installation. If you are not comfortable with what you read we encourage you to seek professional installation assistance.

You will need the following components to complete the installation:
• AUX-IND2B interface module with included cables
• Installation and operations guide
• Wire ties or tie-wraps
• Flat head and Phillips head screwdrivers
• Pliers
• Metric wrenches (for removal of CD changer if applicable)

Everything is mounted in where the current CD Changer is, or where a factory CD changer would be mounted. No wires to cut and in most cases no re-programming at the dealer is required. It will just work!

Download