Capturing Footage Using Ulead VideoStudio

1. Make sure your camera is plugged into a power source or has a full battery.
2. Rewind your tape to the beginning of what you have filmed.
3. Stop the tape and leave the camera on the Play/VCR setting.
4. Plug the camera into the computer that has a firewire card using a firewire cord.
5. Open Ulead VideoStudio (Ver 8 or 9) and choose VideoStudio Editor.
6. Once the program loads, click on the Capture tab at the upper left-hand corner of the program window.
7. The program should now recognize the camera as a capture source.
8. Make sure your footage is captured to the correct folder. As a default, the program will capture the file onto the C: Drive. c:\capture or c:\movies You may change the Capture Folder as needed.
9. To start capturing footage, press the Capture Video icon.
10. You will see your footage being played on the screen in front of you; watch this screen and press the
Stop Capture icon when you have reached the end of your footage.
11. Once you have stopped capturing, you may unplug the camera and turn it off.
12. Before exiting the program, go to File – Save and save the project

Download pdf Capturing Footage Using Ulead VideoStudio