A) SETTING THE ALARM
(a) Siren will chirp once and lights flash once.
(b) If equipped with central door lock, doors lock automatically.
(c) Alarm is armed, the L.E.D blinks.
B) DISARM THE ALARM
(a) Siren will chirp 2 times and lights flash 3 times.
(b) Power door lock/unlock automatically.
(c) Alarm is disarmed and returns to its normal status.
C) SILENT ALARM MODE
(a) Lights flash once, but siren will not chirp.
(b) If the alarm shock is triggered, lights will flash, but siren will not sound.
(c) If the door is opened, the alarm will be activated after 25 seconds.
D) PANIC, CAR FINDING
(a) Press the button in normal arming mode, the siren will sound and lights will flash for 25 seconds. Press again to stop.
(b) Press the button in silent arming mode, the siren will not sound and lights will flash for 25 seconds. Press again to stop.
(c) After the 25+/-5 seconds alarm cycle, the system will return to its previous status (armed or disarmed or silent alarm mode).
(d) Press the button again to stop the status. This feature can also be used as a searching function to locate the vehicle in a large parking lot.
Download
Showing posts with label siren. Show all posts
Showing posts with label siren. Show all posts
Monday, July 14, 2008
Talon T-3300 Alarm System Installation Manual
Mounting the Control Module
1. Choose a location that is away from hot or moving parts that may interfere with the components or their wires. Prevent access to the components as much as possible by mounting them in hidden locations.
2. The internal tilt sensor will be most sensitive when the control module is oriented so that it sits horizontal. Test different orientations of the module before final placement to ensure proper activation of the tilt sensor. Below is a diagram of suggested mounting positions applicable to all motorcycles. Any position where the ‘Talon’ logo on the module faces directly to the side of the motorcycle (and is spun 360 degrees around this axis) will NOT work. Keep in mind that the alarm can be mounted upside down or rest at any angle due to the self-referencing technology used in the tilt sensing mechanism. Mount the control module with the supplied adhesive tape or use the supplied screws.
Mounting the Siren
Ensure that the siren is not installed in a position prone to excessive heat, water or mud splashes! The siren should be facing slightly down so that water will not pool. Fasten the Siren in place using the screws, double sided tape or tie-straps provided with the alarm. Prior to applying the double sided tape, clean the affected surfaces with a suitable cleanser that will remove any dirt and grease. The siren plugs directly into its mating connector of the alarm harness for easy installation.
Battery Back-up Siren ( ‘i’ Models Only)
The Backup Siren has a Piezo-electric element with built-in electronics. The siren will sound if one of the sensors triggers the alarm or if the power supply to the alarm is cut. The back-up function of the siren can be switched off using the enclosed keys. This will be required when disconnecting the motorcycle battery for servicing. When installation is complete, insert.
Download
1. Choose a location that is away from hot or moving parts that may interfere with the components or their wires. Prevent access to the components as much as possible by mounting them in hidden locations.
2. The internal tilt sensor will be most sensitive when the control module is oriented so that it sits horizontal. Test different orientations of the module before final placement to ensure proper activation of the tilt sensor. Below is a diagram of suggested mounting positions applicable to all motorcycles. Any position where the ‘Talon’ logo on the module faces directly to the side of the motorcycle (and is spun 360 degrees around this axis) will NOT work. Keep in mind that the alarm can be mounted upside down or rest at any angle due to the self-referencing technology used in the tilt sensing mechanism. Mount the control module with the supplied adhesive tape or use the supplied screws.
Mounting the Siren
Ensure that the siren is not installed in a position prone to excessive heat, water or mud splashes! The siren should be facing slightly down so that water will not pool. Fasten the Siren in place using the screws, double sided tape or tie-straps provided with the alarm. Prior to applying the double sided tape, clean the affected surfaces with a suitable cleanser that will remove any dirt and grease. The siren plugs directly into its mating connector of the alarm harness for easy installation.
Battery Back-up Siren ( ‘i’ Models Only)
The Backup Siren has a Piezo-electric element with built-in electronics. The siren will sound if one of the sensors triggers the alarm or if the power supply to the alarm is cut. The back-up function of the siren can be switched off using the enclosed keys. This will be required when disconnecting the motorcycle battery for servicing. When installation is complete, insert.
Download
Sunday, July 13, 2008
DC-5 CAR SECURITY SYSTEM with Remote Engine Owner's Manual
A) ARM THE ALARM
(a) Siren will chirp once and lights flash once.
(b) If equipped with central door lock, doors lock automatically.
(c) Alarm is armed after 5 seconds, the L.E.D blinks.
B) DISARM THE ALARM
(a) Siren will chirp 2 times and lights flash 3 times.
(b) Power door lock/unlock automatically.
(c) Alarm is disarmed and returns to its normal status.
(d) In silent mode, the siren will not chrip
Please also refer to “AUTO RE-ARM” feature.
C) SILENT ALARM MODE
(a) Lights flash once, but siren will not chirp. The door lock automatically and light show the arming mode
(b) If the alarm shock is triggered, lights will flash, but siren will not sound. If the door is opened by force, and the siren will chirp immediately; it will be back to arming mode in 25 seconds later when the system is triggered.
D) CENTRAL LOCK AUTOMATICALLY
During driving, press or can remote control the lock and unlock; close the door properly before driving and then turn the key to ‘ON’ position, and the stamp the brake for 15 seconds and then close the door will lock automatically; take the key away from ‘ON’ position and the door will unlock automatically.
Download
(a) Siren will chirp once and lights flash once.
(b) If equipped with central door lock, doors lock automatically.
(c) Alarm is armed after 5 seconds, the L.E.D blinks.
B) DISARM THE ALARM
(a) Siren will chirp 2 times and lights flash 3 times.
(b) Power door lock/unlock automatically.
(c) Alarm is disarmed and returns to its normal status.
(d) In silent mode, the siren will not chrip
Please also refer to “AUTO RE-ARM” feature.
C) SILENT ALARM MODE
(a) Lights flash once, but siren will not chirp. The door lock automatically and light show the arming mode
(b) If the alarm shock is triggered, lights will flash, but siren will not sound. If the door is opened by force, and the siren will chirp immediately; it will be back to arming mode in 25 seconds later when the system is triggered.
D) CENTRAL LOCK AUTOMATICALLY
During driving, press or can remote control the lock and unlock; close the door properly before driving and then turn the key to ‘ON’ position, and the stamp the brake for 15 seconds and then close the door will lock automatically; take the key away from ‘ON’ position and the door will unlock automatically.
Download
Subscribe to:
Posts (Atom)