94-97 Honda Accord Sniper Hood Part Instructions

STEP 1: Adjust hood until proper alignment with matching panels is achieved.
STEP 2: Adjust primary latch until it fits into the bar on the hood. Make sure when the hood is closed you can hear the latch “click” onto the hood.
STEP 3: After you here it click, test it to be sure it’s working properly by grabbing the front edge of the hood and slowly pulling upward with a steady even pressure. If the hood opens it’s not adjusted properly; repeat STEP 2 until hood cannot be pulled open after it’s closed.
STEP 4: Make sure the safety catch hook grabs onto its matching bracket on the hood.
STEP 5: To ensure the safety catch is working properly, close the hood, pull the hood release from inside the car and the hood will partially open. Slowly pull upward on the hood and jiggle it at the same time. If it opens without pulling the safety catch lever then it needs to be readjusted. The safety catch prevents the hood from opening in the event the primary latch fails.
STEP 6: Locate the hood stoppers located on each side of the radiator support. Adjust them until they apply a small amount of pressure to the underside of the hood when it is closed. This will prevent the hood from shaking or rocking.
STEP 7: For installation of squirters, follow Fig. A. Install the provided tubing clips in the pre-drilled holes under the hood to secure the hoses. Our application has 1 squirter. You will need to shorten one hose for this application.

Download

Lombardini 11 LD series engines, code 1-5302-296 Workshop Manual

This manual contains the most important information for the repair of LOMBARDINI air cooled, direct injection Diesel engines type 11LD535-3, 11LD625-3 e 11LD626-3.
SAFETY INSTRUCTIONS
•Lombardini Engines are built to supply their performances in a safe and long-lasting way. To obtain these results, it is essential for users to comply with the servicing instructions given in the relative manual along with the safety recommendations listed below.
•The engine has been made according to a machine manufacturer's specifications and all actions required to meet the essential safety and health safeguarding requisites have been taken, as prescribed by the current laws in merit. All uses of the engine beyond those specifically established cannot therefore be considered as conforming to the use defined by Lombardini which thus declines all liability for any accidents deriving from such operations.
•The following indications are dedicated to the user of the machine in order to reduce or eliminate risks concerning engine
operation in particular, along with the relative routine maintenance work.
• The user must read these instructions carefully and become familiar with the operations described. Failure to do this could lead to serious danger for his personal safety and health and that of any persons who may be in the vicinity of the machine.
•The engine may only be used or assembled on a machine by technicians who are adequately trained about its operation and the deriving dangers. This condition is also essential when it comes to routine and, above all, extraordinary maintenance operations which, in the latter case, must only be carried out by persons specifically trained by Lombardini and who work in compliance with the existing documentation.
•Variations to the functional parameters of the engine, adjustments to the fuel flow rate and rotation speed, removal of seals, demounting and refitting of parts not described in the operation and maintenance manual by unauthorized personnel shall relieve Lombardini from all and every liability for deriving accidents or for failure to comply with the laws in merit.
• On starting, make sure that the engine is as horizontal as possible, unless the machine specifications differ. In the case of manual start-ups, make sure that the relative actions can take place without the risk of hitting walls or dangerous objects, also considering the movements made by the operator. Pull-starting with a free cord (thus excluding self- winding starting only), is not permitted even in an emergency.

Download

Quick Tips Mercedes-Benz M-Class

This guide has been prepared to help you get quickly acquainted with your new Mercedes-Benz and to provide a convenient reference source for common questions.

However, it is not intended as a substitute for your Operator’s Manual. For complete operational instructions, maintenance procedures and important safety messages, please consult your Operator’s Manual and other warning labels in your truck.

SAFETY REMINDERS
Your Mercedes-Benz is equipped with many safety engineering features, including front, side and window air bags for both the driver and front-seat passenger and rear side air bags. Air bags do not replace your sea belts; they supplement the protection offered by seat belts.

Air bags can help protect you in a severe frontal collision and in certain side impacts, but they do not provide protection in any other kind of collision. Always make sure you and your passengers wear safety belts. Warning: The forces of a deploying air bag can cause serious or fatal injury to a child under age 13. A child under 13 must be seated in the rear seat, belted into an appropriate properly installed child restraint. If the child must be transported in the front passenger seat, the child must be belted into an appropriate, BabySmart™-compatible child seat which will deactivate the passenger front air bag if the child seat is properly installed. See Operator’s Manual for additional warnings and information on air bags, seat belts and child seats.

Download