to read carefully this instruction and apply to hints. The towing hitch should be install in points described by a car producer. The instruction of the assembly 1. Take out a spare wheel. Remove two bolts from the towing eye: one from underneath and one from the left side. 2. Fix loosely right angle bar (pos. 5) to the right side of the chassis through hole (pos. A) using bolt M10x35mm (pos. 8). For models without level adjustment: Fix loosely left angle bar (pos. 5) to the left side of the chassis through hole (pos. A) using bolt M10x35mm (pos. 8). For models with level adjustment: Remove bolt X shown in figure 2, place angle bar (pos. 5) between just removed plate and the chassis. Fix loosely using bolt M10x35mm. For Chevrolet Trans Sport: Underneath the bumper, in central section cut out its fragment: width 50mm and depth 40mm. Cut out fragment of bumper reinforcement according to figure 3. Disassemble original towing eye. Put the pin for the rearmost exhaust through hole ø19mm in towing hitch brackets. Mount the towing hitch together with the towing eye on the car. 3. Between installed angle bars put the main bar of the...
Website: www.snbimport.com | Filesize: 100kb
No of Page(s): 2
Download E49-Opel Sintra angielska.pdf
No comments:
Post a Comment