The AFC is adjustable in 500rpm increments and automatically interpolates (averages) between these points. For non-adjustable cam vehicles, the CamFC can be used for its AFC and tachometer features whilst the cam trigger output can be used as an RPM switch for NOS, shiftlight, high boost solenoid etc.
AFC adjustable in 500RPM steps from 0RPM to 9000RPM
Each AFC RPM point adjustable in 1% increments to +/- 40%
Full interpolation between AFC RPM zones
Cam switch-on point is adjustable from 0RPM to 9000RPM
Cam switch-off point is adjustable from 0RPM to 8980RPM
Real-time tachometer displayed in 1RPM increments
DOT Matrix display for clarity under all conditions
Tachometer configurable for all types of vehicles
RPM activated output capable of supplying up to 1.5 amps
RPM output is configurable to switch positive or negative
Anodised Extruded Alloy case
40mhz High Speed RISC Processor
Warning/Caution
Always connect the wiring exactly as described in the instruction manual.
Disconnect the negative terminal of the battery before proceeding with installation.
Do not drop or expose this unit to excessive shock.
Installation should only be performed by an experienced automotive electrician.
Keep this unit away from moisture.
Never disassemble, modify, or tamper with this unit.
Never operate this unit while driving.
Download
No comments:
Post a Comment