Installation Environment
1) The distance between the unit and outside wall or other goods should be kept over 200mm.The unit should be put in well-ventilated area and its temperature is within -10℃~+40 .℃
2) Check air supply pipeline of the unit and use air source with 3~10 bar to supply for the unit. When connecting the air source, please check if there is leakage in connector for air source and ensure that a certain distance between the air hose and heat source should be kept.
3) To ensure safety. Before connecting the air source, please confirm that the air pressure adjusting valve is closed. Never point the air outlet to personnel.
Connecting Hose
1) Lift the vehicle to proper height with lifter.
2) Remove the hose between the auto transmission and radiator. See Fig.5.
3) Fill desired quantity of new ATF into the unit according to the vehicle type.
4) Connect the return hose of the unit to the outlet hose of the auto transmission.
5) Connect the outlet hose of the unit to the inlet hose of the radiator.
6) Connect the air inlet on the unit to compressed air. Please be sure that the needle valve is in the open state and the air pressure adjusting valve is in the closed state before connecting the compressed air.
Download
No comments:
Post a Comment