E50-Opel Corsa Towbar Fitting

1 2 3 4 5 6 7 8 8 9 9 9 9 10 10 11 11 11 A Plastic elements B Clamp mark in acc. with ISO PN Cables joining 1 L Left directional lights 2 + Rear fog lights 3 31 Ground 4 R Right directional lights 5 58R Right side parking lights 6 54 Stoplights 7 58L Left side parking lights FITTING INSTRUCTION This towbar is designed to assembly in following cars: OPEL CORSA “D”, 3/5 doors, produced since 2007, catalogue no. E50 and is prepared to tow trailers max total weight 1300 kg and max vertical load 50 kg. From manufacturer Thank you for buying our product. Their reliability has been confirmed in many tests. Reliability of towbar depends also on correct assembly and right operation. For this reasons we kindly ask to read carefully this instruction and apply to hints. The towbar should be install

in points described by a car producer. The instruction of the assembly 1. For the purpose of installings of the towbar one ought to disassemble the bumper and its metal reinforcement which will not be assembled again. 2. Slip brackets of the towbar (pos. 4 and 5) into chassis members (holes B on protruding threaded pins). Fix them loosely using bolts M10x40mm (pos. 9). On pins twist on two nuts remaining after reinforcement disassembling. 3. Slip the main bar of the towbar (pos. 1) between installed brackets of the towbar (pos. 4 and 5) and fix using bolts M12x35mm (pos. 8) as shown on the drawing. 4. On points (pos. A) slip plastic elements which one ought to move from the metal reinforcement of the bumper. 5. In the foot of the bumper, in its axis, one ought to cut out the fragment: the width 50mm, the height 40mm. 6. Install the bumper. 7. Fix tow ball (pos. 2) using bolt M12x75mm (pos. 6) and M12x70mm (pos. 7). With bolt M12x75mm fix also a socket plate (pos. 3). See the drawing. 8. Tighten all bolts according to the torque shown in the table. 9. Connect electric wires of 7-poles socket...

Website: www.vonohorog.hu | Filesize: 97kb
No of Page(s): 2
Download E50-Opel Corsa D angielska.pdf