Thank you for purchasing the XS Engineering PowerMax System for the 1993-95 Mazda RX-7 (FD3S). This system has been designed by XS Engineering’s Research and Development Team to complement the RX-7’s sturdy yet agile chassis by adding a healthy dose of raw turbocharged power! By taking advantage of Mazda’s potent 1.3-liter 13B-REW rotary engine, XS Engineering bends the laws of physics once again by designing a single turbo system that delivers both immediate boost response and 368 Dynojet-proven horsepower to the wheels at only 13.5psi! Aside from this, please take the time to read through and understand this manual fully before you proceed with the installation process.
Preparation
Please bear in mind that the proper conversion from a sequential turbocharger setup into a single turbocharger one is no easy task. This is the reason why we ask that only experienced professionals install this turbocharger system. In addition, we strongly suggest that this turbocharger system only be installed on engines that are in good condition. Please inspect the following:
1. Cooling system – make sure that this is within or better than factory specifications.
2. Ignition system – make sure that this is within or better than factory specifications and that the ignition timing is stock.
3. Fuel delivery system – make sure that the fuel pump, fuel filter, and fuel injectors are all working within factory specifications. Also, make sure that the fuel used is at least 91 octane or higher.
4. Engine compression – make sure that the engine’s compression is within factory specification.
No comments:
Post a Comment