RNS-E Installation Instructions and Photo's A couple words of warning to begin with, if you are paranoid on minor scratches on your interior, please don't do this. Most likely you will end up with one or a few if you’re not careful Likewise, if you are afraid of applying force when pulling parts out, please don't do this. Some of the parts are fitted quite tightly, and need a certain amount of force to unplug
Do this and follow my instructions at your own risk
I attached protective covering to everything around the install to stop any damage
First thing to do is remove the standard head unit, insert the keys and pull out, disconnect all cables.
Once removed the trim round the buttons pulls off easily
Next remove all the buttons and cup holder, unclip and unplug cables
The holder for the switches is used in the new din cage
Download
No comments:
Post a Comment