Powerwave Series Technical Manual

Before installing this version of upload/download software, please remove any existing PW8 or PW16 software first.
This is done by going to “Control Panel” then “Add/Remove Programs”. Next, select the “8 (or 16) zone panel upload download” option in the window then select “Add/Remove”. Once the old program has been removed you may proceed to install the new software. (NOTE: if you remove the old program as described above, all of your customer database files will be retained in the “Upload Download” folder, see below for the full directory tree).

To install the software, insert the disk labeled Disk 1 of 2 into the floppy drive. Next, select “Run” from the start menu.
Then type in; A:\setup.exe(use B:\setup.exe if using the B drive). The program will automatically install itself. When the installation process asks for Disk 2, remove Disk 1 from the floppy drive replacing it with disk 2 of 2 then press “enter”. When finished, select the “restart the computer” option so that the installation process can be completed.
The software will automatically create a new folder called “8 Zone Panel Upload Download” or “16 Zone Panel Upload Download” and install itself in the following area on your com- puters “C:” drive;

Download