It is recommended that, for your convenience, the machine is positioned close to your washing machine. The tumble dryer must be installed in a clean place, where dirt does not build up. To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm, level surface. Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, raise or lower the feet until it is. The feet must never be removed.
Specialist accessories
The following special accessories are available from your Service Force Centre.
Stacking kit (optional accessory):
It should be possible to stack your new dryer on top of a front loading washing machine with a covers depth of 60 cm and width of 60cm. Read carefully the instructions supplied with the stacking kit. Please contact your local John Lewis branch for further ad- vice.
Version to be supplied:
Installation kit for external condensate drain
Installation kit (125 122 510) for direct draining of condensate into a basin, siphon, gully, etc. The condensate tank then no longer has to be drained, it must however remain in its intended position in the machine. Refer to the “Programme options” section for how to deactivate the FULL TANK display.
Max. displacement height: 1m from the base of the dryer;
max. displacement length: 3m – with extractable stacker plate
Download
No comments:
Post a Comment