Audi A4 Brake Installation Manual

Following the steps for this Audi A4 Brake Installation Manual
PREPARATION FOR INSTALLATION
1. Be sure that the vehicle is parked on level concrete and the parking brake is on.
2. Place stops in front of and behind rear tires.
3. Consult owner’s manual for proper lifting and wheel removal procedures before lifting front of vehicle.
4. Place jack stands under vehicle for added stability.
5. Remove wheel.
6.Place a brake line clamp on the brake line. This will minimize brake fluid loss.
7.Using an 11mm wrench, disconnect brake line from caliper. Be aware that brake fluid may leak from line once disconnected.
8. Disconnect ABS sensor grommet from mounting bracket by pulling straight up.

Download