Enzo Two-in-One User Manual

NSTALLING THE WHEEL
Fixing the wheel in place
1. Place the wheel on a table or other flat surface.
2. Place the clamp screw (16) in the table clamp (15) and then screw the clamping unit into the hole on the underside of the wheel until firmly fixed in place. Do not turn the screw too tightly, as you risk damaging the clamping unit and/or the table.

Connecting the pedal set
1. Connect the pedal connector (11) to the pedal receptor (12).
Connecting the wheel (a) For PS2
1. Switch off your console before connecting the wheel.
2. Connect the console connector (13) to port 1 of your console and connect the USB connector (14) to the upper USB port.
3. Place the PC/PS2 selection switch (9) on PS2 ()
4. Switch your console back on.
5. Once your racing game has loaded, turn your wheel on by pressing the PS2:On/Off button (7). The wheel’s Mode LED (8) glows red. You are now ready to play!
(b) USB installation for PC
The USB connector allows you to hot-plug your wheel into your computer. First, place the PC/PS2 switch in the PC position ( ) Start your computer up and plug the USB connector into one of the USB ports located at the back of your computer. Windows 98/Me/2000/XP will then automatically detect the new peripheral device.

Download